Commonly Used Wafer-type Fluorine-lined Butterfly Valve Size Standards

Publish Time: 04/21 2025 Author: Site Editor Visit: 72

Lined Butterfly Valve Its size ranges from 2"(DN50) to 40" (DN1000), with hard seat and double Dtype gate. The valve body has at least four side flange holes. The valve can be installed with the following manual devices:

Manual device (2" to 12"), manual gear lever (2" to 40",) and electric and pneumatic devices (2" to 40") The structural length is suitable for GB 12238 BS5155 API609, MSS SP-76, DIN 3202-K1 (ISO 5762 T5).

Advantages of wafer-type fluorine-lined butterfly valve in modern industry

Side flange holes meet the following standards: GB9112-88, DIN2501, BS4504, ISO2084, ISO2531, BS10-E, ANSI125/150, ASA125/150, AS2129 Table D/E. Valve test: API598 Safe working pressure: PN6, 10, 16. As shown: Butterfly valve BV1000L

Note:
"M","L1","L2","D1"These dimensions comply with the following standards: GB9112-88, DIN2501, BS4504, ISO2084, ISO2531, BS10-E, ANSI15/150, ASA125/150.AS2129 Table Weight (kg)

Commonly Used Wafer-type Fluorine-lined Butterfly Valve Size Standards