Fluorine-lined Gate Valve Lining Material

Publish Time: Author: Site Editor Visit: 62

Lined Gate Valve Lining material

Polytetrachloroethylene PTFE (F4)
Usage medium: strong acid, strong alkali, strong oxidant, etc.
Usage temperature: -200~180
Features: It has excellent chemical stability, high heat resistance, cold resistance, low friction coefficient, and is an excellent self-lubricating material, but has low mechanical properties, poor fluidity, and large thermal expansion.
Polyvinylidene chloride PVDF (F2)
Usage medium: Resistant to most chemicals and solvents,
Usage temperature: -70~100
Features: Tensile strength and compression strength are better than F4, resistant to bending, weathering, radiation. Light and aging, etc. The biggest feature is good toughness and easy molding.
Polyolefin: PO
Applicable medium: Acids, alkalis, salts of various concentrations and certain organic solvents.
Usage temperature: -58~80
Features: It is the world's most ideal anti-corrosion material and has been widely used in large-scale equipment and pipeline linings for rotational molding.
Perfluoroethylene FEP (F46)
Applicable media:
Any organic solvent or reagent, dilute or concentrated inorganic acid, alkali, ketone, aromatic hydrocarbon, chlorinated hydrocarbon, etc.
Using temperature:
-85~150
Features: Mechanical, electrical properties and chemical stability are basically the same as F4, but the outstanding advantages are high dynamic toughness, excellent weather resistance and radiation.
Polytrifluoroethylene PCTEF (F3)
Applicable media:
Various organic solvents, inorganic corrosive liquid (oxidizing acid)
Using temperature: -195~120
Features: Heat resistance, electrical properties and chemical stability are second only to F4, mechanical strength, creep performance, hardness are better than F4.
Polypropylene: RPP
Applicable media: Aqueous solutions of inorganic salts, dilute or concentrated solutions of inorganic acids and alkalis.
Operating temperature: -14~80
Features: One of the lightest plastics, its yield, tensile and compressive strength, hardness are better than low-pressure polyethylene, with outstanding rigidity, good heat resistance, easy molding, and low cost. After modification, it has better impact resistance, fluidity, and bending elasticity.
Polyvinyl chloride: hard) PVC
Applicable media: water-resistant, concentrated alkali, non-oxidizing acid, chain hydrocarbon, oil and ozone, etc.
Using temperature: 0-55
Features: high mechanical strength, excellent chemical stability and dielectric properties, good oil resistance and anti-aging, easy to weld and bond, and low price.

Fluorine-lined Gate Valve Lining Material

This site uses cookies

We use cookies to collect information about how you use this site. We use this information to make the website work as well as possible and improve our services.