How To Maximize The Development Potential Of The Valve Industry
With the continuous progress of social, economic and technological development, people's living stan...
Installation And Use Of Pneumatic Knife Gate Valve
Installation and use of Lined Gate Valve: 1. Before installation, check the valve cavity and sealing...
Valve Material And Its Relationship With Operating Temperature
The main valve body materials are: C carbon steel, I 1Cr5Mo chrome-molybdenum steel, H Cr13 stainles...
Valve Corrosion Is One Of The Important Factors Causing Valve Damage
Lined Valve Corrosion is the destruction and deterioration of materials under the influence of vario...
Application Of Slag Discharge Knife Type Gate Valve
Application of Lined Gate Valve 1. The knife-shaped slurry gate valve is made into two types of conc...
Trends In The Valve Product Market
The distribution of the valve market is mainly based on the construction of engineering projects. Th...
The Structure And Advantages And Disadvantages Of Oxygen Stop Valve
Lined Globe Valve structural form: The structural forms of the stop valve body include straight-thro...
Rely On Core Technology To Expand The Valve Industry
A few years ago, in the Lined Valve industry, when it comes to rubber-lined and fluorine-lined valve...
Rubber Lined Diaphragm Valve Fluorine Lined Diaphragm Valve Knowledge
Lined Diaphragm Valve is a special form of shut-off valve. Its opening and closing parts are a diaph...
Valve Sealing Performance And Valve Quality
The sealing of Lined Valve is an important indicator to measure the quality of valves. The internal ...
Selection Of Chemical Valves For Corrosive Media Conditions
Selection of chemical Lined Valve valves under various corrosive media conditions For valves under c...
Analysis Of My Country's Valve Industry From The Perspective Of The Industrial Chain
An industry does not develop in a single way. It will form an industrial chain with its associated u...
My Country's Valve Companies Need To Improve Valve Quality
At present, there are about 6,000 Lined Valve enterprises in my country, of which 900 have an annual...
General Procedure For Valve Overhaul
General procedures for repairing Lined Valve: 1. When dismantling the valve, first use steel letters...
Introduction To Valve Seal Design
Lined Valve The function of the upper seal is to prevent the medium in the pipeline from leaking fro...
Principles To Be Followed In Selecting Petroleum Valves And Chemical Valves
Faced with numerous Lined Valve classifications and complex working conditions, to select the most s...
Valve Parts Introduction
Lined Valve The main parts include valve body, valve cover, opening and closing parts (such as gate,...
Valve Drive
Drive device: The power part of the belt conveyor consists of a motor high-speed shaft coupling redu...
Usage Of Domestic Valve Industry Standards
Lined Valve products are widely used in petroleum, chemical, metallurgy, electricity, hydraulic, nuc...
Valve Knowledge To Prevent Medium Backflow
The function of Lined Valve is to allow the medium to flow in one direction only and prevent the flo...
Introduction To Materials For Anti-corrosion Valves
Lined Valve Polytetrafluoroethylene PTFE (F4) Applicable media: strong acid, strong alkali, strong o...
Fluorine-lined Diaphragm Valve Technical Information
1. Overview: Lined Diaphragm Valve is a special type of valve with shutoff function. Its opening and...
Valve Actuator Introduction
Lined Valve 1. Origin of the actuator The actuator, also known as the actuator, is a commonly used m...
Valve Design Procedure
1. Basic content of Lined Valve design As an important part of the pipeline system, the valve should...