Design And Application Of Electric Fep-lined Shut-off Valve

To select a lined globe valve for corrosive or high‑purity media, follow this sequence: (1) specify FEP, PFA, or PTFE liner based on temperature; (2) choose electric actuation for automated flow modulation or isolation; (3) verify linear flow characteristic for precise control; (4) confirm ANSI Class 150 or 300 flange compatibility. This combination delivers tight shut‑off and accurate throttling, making it suitable for processes requiring flow regulation and positive isolation in a single valve.

The Dual Identity: Isolation vs. Regulation

A lined globe valve is not a simple on‑off device. Its internal geometry—a disc moving perpendicular to a seat—provides a linear flow characteristic, allowing precise flow control. When fully closed, the disc seals against the seat, providing bubble‑tight shut‑off.

In a single valve, flow can be regulated during normal operation and the line isolated for maintenance, reducing the number of valves and fittings required.

Electric Actuation: Precision and Automation

Electric actuation enables automated, remote operation with high positioning accuracy.

• Modulating control – Continuous positioning for flow regulation, accepting 4‑20 mA or 0‑10 V signals.

• Fail‑safe options – Spring‑return or battery backup for fail‑closed or fail‑open positions.

• Position feedback – Integrated sensors confirm valve position for process control.

For processes requiring frequent throttling or remote adjustment, electric actuation eliminates manual intervention and improves consistency.

Liner Materials: Matching Chemistry to Service

A pfa lined globe valve is specified for wet chlorine and bromine where permeation must be controlled. For high‑purity applications, pfa lined globe valves offer a smoother surface and lower ion leaching. A ptfe lined globe valve provides a cost‑effective solution for general acid and solvent services.

Flow Characteristic and Rangeability

The globe valve's linear flow characteristic means flow rate changes proportionally with stem travel. Rangeability is typically 30:1 to 50:1, superior to butterfly valves (10:1 to 20:1). This enables precise low‑flow control for dosing and blending.

Design Features for Corrosive Service

🔹 Full encapsulation – All wetted metal surfaces covered with fluoropolymer liner.
🔸 Self‑draining body – Prevents liquid hold‑up.
🔹 Top‑entry bonnet – Maintenance without removing valve from the pipeline.

Installation and Operational Guidance

▪️ Flow direction – Install flow‑to‑open for better shut‑off and reduced seat wear.
▫️ Actuator sizing – Select torque based on maximum differential pressure at closure.
▪️ Position calibration – Calibrate during commissioning for accurate stroke and limit settings.
▫️ Maintenance – Inspect liner and seat during shutdowns. Replace if wear exceeds 1mm.

Common Applications

• Chemical dosing – Precise acid or caustic injection.

• High‑purity water – Contamination‑free flow control.

• Halogen service – Wet chlorine and bromine with PFA lining.

• Corrosive slurry – Abrasive media with fluoropolymer protection.

Final Selection Logic

For corrosive fluid systems requiring both isolation and throttling:

1. Define fluid composition, temperature, and pressure.

2. Select FEP for general acids (≤150°C); PFA for halogens and high‑purity (≤180°C).

3. Choose electric actuation for automated, precise control.

4. Verify linear flow characteristic and rangeability.

5. Confirm ANSI Class and flange compatibility.

6. Specify self‑draining body and top‑entry bonnet.

The dual‑purpose design of a lined globe valve—combining throttling precision with shut‑off reliability—makes it a versatile choice for corrosive fluid handling. Electric actuation extends this capability to automated processes, enabling consistent flow control without exposing personnel to hazardous media. When specified with FEP, PFA, or PTFE liners, the valve maintains its performance across a wide spectrum of aggressive chemicals, offering a dependable solution for critical control applications.

FVF Electric Actuated FEP Lined Globe Valve

• FVF Lined globe valve is fully lined with fluorine materials.It has good anti-corrosive function and it is a better choice to shut-off in corrove pipeline.
• Globe valve refers to the valve with disc driven by stem along the central axis to make lifting movement, is a common block valve,used to connect or throttle medium.
• It has the advantage of compact structure, flexible on-off, strong corrosion resistance, trip shorted and widely applicated in chemical, petroleum, pharmaceutical, food, metallurgy, paper, hydropower, environment protection etc.
• They can be equipped with handwheels or can be actuated with electric or pneumatic actuators. A full range of accessory items are available including limit switches, solenoid valves, positioners and manual override devices.

Product Parameter

Materials of Main Parts

Technical Specification