Where Is The Best Place To Install The Fluorine-lined Check Valve?
We know that the function of Lined Check Valve is to prevent the backflow of fluid and other media to produce gas plug phenomenon. It is precisely because of this function that its installation cannot be installed randomly, and the installation location is also very particular. So, how to install it and where to install it?
The installation location of the fluorine-lined check valve is mostly chosen to be installed next to the water meter. The backwash rate of this place is relatively small, which can effectively prevent the backflow from causing excessive impact on the water meter. Or it can also be selected at the bend of the medium pipeline and the place with a large vertical drop. These places can effectively prevent water hammer from damaging the pipeline and impacting the water meter. It is worth noting that there is generally an indicator arrow on the fluorine-lined check valve. The direction indicated by this arrow is the flow direction of the pipeline medium. Therefore, it is necessary to see it clearly before installing it. Otherwise, if the direction is reversed, the fluorine-lined check valve will not work.
The above are the precautions for correctly selecting the installation location of the fluorine-lined check valve. I hope it can help everyone.